I got bitten by the kayak fishing bug, and am learning to like some things I figured I never would. After trying several times to fish from my "Artic", then having my pirogue blow the bottom laminations (see earlier post), I decided to get a Sit on Top. Of course, I looked for one that was as much like a sea kayak as possible - an "LPB" (Long Pointy Boat) as some of the skin boat folks call them.
I ended up with a used Wilderness Systems' Tarpon 160i. It's definitely long/pointy, but I was still afraid it would be like riding a cork, as my other experiences with SoTs were like that.
It isn't. It tracks very well, has pretty good speed, and once I get an appropriately longer paddle than my Werner Camano, will be da bomb for fishing.
It was already set up for fishing, even with some things I probably won't use, like fish finder mounts.
Here are a couple of pictures that were sent by the guy I got it from (he bought a Hobie Pedal drive boat).
I'll have to see if it becomes my 'go to' boat for just messing about - the "Artic" still fits that bill, since it's light, fast, and easy to unload.
Friday, September 27, 2013
Monday, September 23, 2013
Paddling spot - headwaters of Lake Blackshear
My latest spot for a quick paddle is on the top end of Lake Blackshear, near Drayton, GA. It's not as "birdy" this time of year as I expect it is in the spring and early summer, but there are wading birds and ducks, plus tons of turtles.
Here's a Google earth image.
The arrow points to a launch called "Camper's Haven". There's a little store + bar and grill there, and I believe the launch itself is owned by someone else. You drop your $2 launch fee in the box and take off. The concrete ramp is both steep enough and shallow enough to launch from there.
Notice the sloughs on both sides of the big S curve? They are relatively deep, full of fish, turtles and birds. Just south of here is where the former state record alligator was taken, so I know there are big and small gators around. Traffic on the river isn't bad, and I don't stay in the channel much. The current's pretty slow too, so ferrying across is effortless.
I need to fish more here and see what I can turn up. General map coordinates from Google: 32.044605,-83.963835.
Flint River south of the Hwy 27 Bridge |
Notice the sloughs on both sides of the big S curve? They are relatively deep, full of fish, turtles and birds. Just south of here is where the former state record alligator was taken, so I know there are big and small gators around. Traffic on the river isn't bad, and I don't stay in the channel much. The current's pretty slow too, so ferrying across is effortless.
I need to fish more here and see what I can turn up. General map coordinates from Google: 32.044605,-83.963835.
Labels:
boats,
Fishing,
kayak,
kayaking,
Lake Blackshear,
paddling,
Tarpon 160i
Friday, September 20, 2013
My now deceased Pirogue - "Boueux"
In a post from February of 2011, I was trying to decide whether to build a pirogue to fish from or a kayak for longer touring. By the end of August of 2012, I'd made up my mind and started a pirogue, to be named "Boueux", which means muddy in French and sounds kinda like "Boo". Here's the one photo I remembered to take:
The plan was for a 14-1/2 foot long, 24 inch beam boat.
I got the main body glued up and to the point of glassing it when my mom had her stroke. That put my weekends on hold, so the boat sat under plastic in the yard all winter and most of the spring.
This past summer, I started sanding and fairing. The boat building instructor at the Apalachicola Maritime Museum convinced me that I didn't need to glass it, especially since I hadn't used marine ply.
I sanded and sealed, puttied and faired, and had her looking pretty good:
This photo is 'done', just before painting the gunwales and inside of the hull. I'd finally gotten it dried in, fully painted, and was ready for a weekend trial when we had a couple of weeks of non-stop rain, then three days of unusually hot sun.
Well, the laminations in the plywood couldn't handle that. They decided to blow out the bottom.
Guess I will paddle my kayaks after all. Lesson learned: If you're going to be a shade tree boat builder, get the wood soaked with epoxy or whatever finish as early as possible, OR...get a workshop.
I think I'll name my Tarpon 160i "Boueux Deux"
The plan was for a 14-1/2 foot long, 24 inch beam boat.
I got the main body glued up and to the point of glassing it when my mom had her stroke. That put my weekends on hold, so the boat sat under plastic in the yard all winter and most of the spring.
This past summer, I started sanding and fairing. The boat building instructor at the Apalachicola Maritime Museum convinced me that I didn't need to glass it, especially since I hadn't used marine ply.
I sanded and sealed, puttied and faired, and had her looking pretty good:
This photo is 'done', just before painting the gunwales and inside of the hull. I'd finally gotten it dried in, fully painted, and was ready for a weekend trial when we had a couple of weeks of non-stop rain, then three days of unusually hot sun.
Well, the laminations in the plywood couldn't handle that. They decided to blow out the bottom.
Guess I will paddle my kayaks after all. Lesson learned: If you're going to be a shade tree boat builder, get the wood soaked with epoxy or whatever finish as early as possible, OR...get a workshop.
I think I'll name my Tarpon 160i "Boueux Deux"
Subscribe to:
Posts (Atom)